一级黄色一级片-国产精品线在线精品-亚洲中文字幕aⅴ天堂-天天操天天操-窝窝午夜理论片影院-亚洲成人免费网址

Service Hotline

400-9619-700

Index >>

Sumitomo gearboxes are built to last

27 Apr,2025

3.png

A couple of gearboxes were found leaking which prompted the Mariners’ stadium maintenance staff to reach out to Sumitomo to inspect them. It was recommended by Sumitomo’s Sales team to do a preventive inspection in order to avoid failure of the gearbox during service. The exterior of the gearbox does not show any defects other than the leakage found on a couple of units (Figure 8). The interior of the components showed only minor wear. The Cyclo reduction components (Figure 9) were found to be in an almost new condition. After over 24 years of gearbox operation, it is likely to find spalling on the eccentric cam or micro pitting on the disc lobes. In this case, none of these two failure modes was found, and the reduction components were deemed re-usable.

As for the bevel gears, no failure modes other than minor abrasion was found (Figure 10). The bevel gears usually operate at lower speeds than the Cyclo portion, so the minor wear will not represent an issue. The bevel gears were also deemed re-useable.

Aside from checking for the condition of the reduction components, it is a standard practice for Sumitomo’s Repair Team to do an overhaul of the unit. An overhaul would include the replacement of normal wear and tear items such as seals and bearings. Additionally, it was recommended to replace input and output shafts in order to avoid components with minor rust, in order to facilitate installation. Keeping your operations green As there is a global awareness over climate, companies are pushing towards reducing energy consumption to reduce carbon emissions. From the gearbox manufacturer’s side, a reliable Sumitomo gearbox, in combination with preventive maintenance practices, can result in reducing energy consumption by avoiding the manufacture and assembly of a replacement gearbox. As shown in this case study, there was no need to either replace the Sumitomo gearbox on this application, nor there was a need to remove it to repair / overhaul any gearbox in over 24 years of use. As for the driven machine, the precision required in the manufacturing of drive components can lead to longer manufacturing times and increased energy consumption. However, the use of Sumitomo's Taper Grip Bushing can help reduce the energy consumption used in manufacturing in two ways: 1. No key is required (except for a few specific applications). 2. No special driven shaft tolerance is required. As a result, commercially available shafting can be used, which removes two manufacturing operations and makes the manufacturing process more energy efficient. The installation process also affects energy consumption. Sumitomo's Taper Grip Bushing makes installation quicker and easier by providing greater clearance between the driven shaft and hollow bore, eliminating the need for special tools. Additionally, only a small amount of anti-seize paste is required for dismounting the gearbox, which makes the product more environmentally friendly (Figure 11). Finally, the use of Sumitomo's Taper Grip Bushing as an output connection reduces the failure rate and increases service time. In contrast, Keyed Hollow Bore installations have a small clearance between the hollow bore and driven shaft, which can result in fretting corrosion due to the rubbing of the driven shaft against the hollow bore. This can damage the hollow bore, driven shaft, and seals, leading to increased failure rates. Thanks to the friction operating principle of Sumitomo's Taper Grip Bushing, the hollow bore clamps onto the driven shaft, eliminating the risk of fretting corrosion and reducing the energy required to remove and replace the gearbox.

After over 24 years in service, the condition of the gearbox was deemed re-usable. Seals and bearings were replaced as it is recommended during overhaul. Input and output shafts were recommended to be replaced in order to facilitate future installations.  The long service time of the gearbox was a result of:  - A deep understanding of the application, resulting on the proper selection of the gearbox. - The excellence in maintenance practices that are reflected on the condition of the gearbox, as the reduction components are in excellent shape. Due to the high quality of the Sumitomo gearboxes, rarely, or if ever, any issue was found during the maintenance inspections. Proper selection and maintenance, in combination with high quality reduction components, are crucial for maximizing the gearbox’s service life and keeping your operations green.

主站蜘蛛池模板: 日韩黄色一级片 | 亚洲小说欧美激情另类 | 国产精品视频一 | 第一福利丝瓜av导航 | 亚洲欧美在线观看首页 | 美女视频一区二区三区 | 一本色道久久88亚洲综合 | 精品国产线拍大陆久久尤物 | 成人小视频在线 | 国产高清视频一区二区 | 午夜色综合 | 婷婷人人爽人人爽人人A片 北条麻妃国产九九九精品小说 | 81精品国产乱码久久久久久 | 亚洲欧美在线观看 | 色爱区综合激月婷婷激情五月 | 久久久久一区二区 | 久久成人动漫 | 亚洲久久草 | 欧美影院一区二区 | 精品日韩在线视频 | 成人h视频在线 | 欧美色图一区二区 | 男人的天堂亚洲一线AV在线观看 | 草草免费| 欧美三级真做在线观看 | 久久免费精品国产72精品剧情 | 欧美激情一区二区三区在线 | 国产精彩视频在线观看 | 欧美午夜理伦三级在线观看 | 国产精品A久久久久久久久 日韩精品在线观看一区 | 欧美色欧美亚洲另类 | 国产日韩一区二区三区在线观看 | 在线视频欧美一区 | 国产精品亚洲综合一区 | 久久中文字幕综合婷婷 | 精品在线视频观看 | 日本高清视频www夜色资源 | 欧美日韩高清一区 | 92看看影院| 99re视频在线播放 | 精品国产乱码久久久久久丨区2区 |